SANKYO ELECTRONICS CO., LTD.
ーThe fine lead-pin manufacturerー

Product line up (All Sankyo products are made by cold forging process)

L with one edge R pin

Main material: Kovar, NiFe alloy, Copper. Please contact for details about material.
Usage: For hermetic seal
Diameter: As our past record Φ0.5mm - Φ1.0mm

L with flange pin

Material：Kovar, NiFe alloy. Please contact for another material production possibilities.
Usage：For hermetic seal, Connectors
Diameter： As our past record Φ1.50mm 〜

Spoon pin

Main material: Kovar, NiFe alloy, Copper, Aluminum etc. Please contact for details about material.
Usage: For hermetic seal
Diameter: As our past record Φ1.0mm - Φ2.0mm

Both edges Flange pin

Main material: Kovar, NiFe alloy. Please contact for details about another material possibilities.
Usage: For Special connector purpose
Diameter: Φ0.3mm~ Other diameters are also possible. Please ask freely

Thinner diameter in the middle pin

Main material: Kovar, NiFe alloy, Copper Aluminum. Other diameters are also possible.
Usage: For Special connector purpose
Diameter: As our past record Φ3.0mm~ Other diameters are also possible. Please ask freely

Thicker diameter short length pin

Main material: Kovar, NiFe alloy, Copper Aluminum. Other diameters are also possible.
Usage: For Special connector purpose
Diameter: As our past record Φ3.0mm~ Other diameters are also possible. Please ask freely

Head hole pin
 

Main material: Kovar, NiFe alloy, Copper, Stainless, Aluminum etc. Please contact for details about material.
Usage: connector pins, electronic parts, etc.
Diameter: Please ask

Straight pin

Main material: Kovar, NiFe alloy, Copper, Stainless, Aluminum etc. Please contact for details about material.
Usage: Glass terminal, hermetic terminal, connector pins, electronic parts, etc.
Diameter: Φ0.05mm - Φ4.00mm

Nail headder pin

Main material: Kovar, NiFe alloy, Copper, Stainless etc. Please contact for details about material.
Usage: Glass terminal, hermetic terminal, connector pins, electronic parts, etc.
Diameter: Φ0.15mm - Φ4.00mm

Middle flange pin

Main material: Kovar, NiFe alloy, Copper, Stainless etc. Please contact for details about material.
Usage: Glass terminal, hermetic terminal, connector pins, electronic parts, etc
Diameter: Φ0.15mm - Φ4.00mm

Block, (heatsink)

Main material: Copper, Brass and other materials are available. Please contact for details about material.
Usage: Heatsink for TO header, glass terminal, electronic parts, etc.
Dimension: 1.00mm x 1.00mm~ (Mushroom size: 2.60mm x 1.20mm

Crank shaped pin

Main material: Kovar, NiFe alloy, Copper, Stainless, Aluminum etc. Please contact for details about material.
Usage: GTMS pins, connector pins, electronic parts, etc.
Diameter: Φ0.15mm - Φ1.00mm

---